How To Use a Pole Saw: A Step by Step Guide

As an Amazon Associate I earn from qualifying purchases. I also participate in other affiliate programs and may earn a small commission from qualifiying purchases.

Pole saws act as a convenient and suitable halfway between a stepladder and a chainsaw while acting as a tool for chopping leaves and trees from far away. There is a need for occasional pruning of trees with thick and broken branches.

Branches can be dangerous when not trimmed as they can cause property damage, power outages, or severe injury when striking a person. That’s why controlled trimming operations are crucial. They can work as a perfect tool for cutting unwanted flora, where it is hard to reach.

As the market is full of various pole saw brands, you need to be careful when buying the right one. People are often confused about how to use a pole saw. Now what you have to do? Well, we have made it easier for you. Here we have explained a step-by-step guide about how to use a pole saw.

Step-by-Step Guide About How to Use a Pole Saw

Clean a Massive Work Area

When using a pole saw, the first thing is to clean a large area for effective working. Work area needs to be free of people and property, or you have to address the people not to re-enter the area again.

The other thing that you have to consider is there are no trip hazards over the place, so you can move quickly and freely while working. When working in a public area, it is usually recommended to rope off the area for keeping other people safe. It is a foremost duty before starting the work.

Build a Plan Where to Cut

Creating a worthy plan before cutting is highly crucial. It is best for you if you plan out where you have to make the cuts. That is because you just can’t cut the limbs or branches without thinking about the whole process.

Firstly, examine the whole tree correctly and look upon every branch you have to cut off. Once you know how much work you have to deal with, then move to the next step.

Lower Branches Need to Be Cut Earlier

Figure out how you will be able to access the highest branches. What could be the best way to reach them? Well, the perfect way to cut the lower branches first. In this way, you will get easy access to the high branches.

You will get a clear path for making safe and smooth cuts over the high branches you plan to remove. So, plan for cutting lower branches of the tree first and then work on higher wood pieces.

Get Yourself In the Correct Position

Isn’t it look difficult to find the best position for using a pole saw? Well, it’s not! It is preferable to stand over the side of the branch rather than directly below it. When wood is falling out of the tree, this position will usually reduce the chances of injury. 

You are keeping the saw at an angle when cutting is every worker’s desire. It would be best if you hold the pole saw at your chest level too.

Adjusting Pole Saws Length

Once you have settled yourself in a correct position, then before starting cuts, it is the ideal time for adjusting your saw to its correct height. It would help if you saw the manufacturer’s instruction on adjusting your pole saw over various lengths.

The other thing is to stretch the saw so that its blade reaches the lowest branch that needs to be removed while holding the saw at your chest level.

Put the Pole Saws Blade In the Right Position

Move the saw to the branches you want to cut using both hands. Here you have to see and make sure that you have complete control over the saw’s weight.

Once you get comfortable and the tool is in control, move the blade to rest on the weight of the limb or branch.

Start Cutting

Firstly start cutting slowly and controlled. Cutting the branch at high speed above the normal can cause blade slipping while making the process harder. So it’s preferable to create a groove in the wood. 

When cutting limbs, it’s relatively easy; you can cut them quickly. You have to cut slowly for creating a groove in a branch. Use your finger to tap the throttle and push in lightly to make a suitable groove in the wood. That will enable the worker to cut faster later on.

When making first cuts, you must anticipate as the saw can slip to the sideways, especially when the branch is sloped. When it slips, you must stop the cutting process and reposition the blade before starting again.

Finish the Cut

Once the saw is secure after creating a groove, you can increase the cutting speed. Keep your eye on the branch when the cuts bite deeper. You must be standing off the side, but the branch can also fall in any unpredictable way.

Make sure you can quickly move out of the way in case of any emergency to prevent a severe injury.

Clean the Area

When a branch falls out to the ground, it is a reliable idea to move it out of the place before you plan to make the next cut. As you will reposition yourself for removing other limbs and branches, this will allow you to move efficiently.

Related

Safety Tips while Using a Pole saw

  • Firstly wear the correct pole saw protective gear that includes a stiff hat or helmet, eye protection, gloves, snug-fitting clothes, and boots.
  • You must only cut during the day when it’s easy to see.
  • Never use the pole saw in wet or rainy conditions, especially when having an electric pole saw.
  • Always cut a single branch at a time. Never try cutting multiple branches in a row.
  • Remove the fallen branches before starting the next cut.
  • When you are cutting, you must be ready for a kickback. They usually occur when the tip of the blade strikes any hard object. That causes the pole saws blade to fly backward. So make sure of having reasonable control over the tool while using it.
  • These saws are made to use on limbs and the branches with a couple of thicknesses. The thicker is the wood, the slower and tiring it is to cut.
  • Pole saws that can get above 8 feet are a bit heavy and tiring when working consistently.
  • It would be best if you never worked near a power line, especially when you are a beginner, as it is not safe.

Frequently Asked Questions

How far can a pole saw reach?

A pole saw is a vital tool for maintaining your yard or garden. It will help you to prune trees and shrubs quickly. This is a handy equipment that is easy to use. It only requires a button to start up and is incredibly easy to handle.
Pole saw can tackle softwood branches that are several inches thick. You can easily cut some hardwood trees that are only four to five inches thick. If you are a beginner, read the manufacturers guide carefully before using a pole saw.

Is it possible to trim hedges using a pole saw?

For thick limbs that are above the ground or your height, pole saws come in a handy design. These saws are developed to tackle branches individually regardless of size and can trim branches exclusively.
It can help you to trim hedges, brambles, and vines occasionally. But it would help if you kept in mind that these saws do not deliver accuracy and precision; it only enables you to get rid of undesirable branches and trimming them. If you are interested in shaping the hedges, pole saws will not do the job.

Conclusion

We know that it’s quite challenging to remember all of the crucial steps for using a pole saw. But we have tried our best to make it easy for you. It will enable you to cut branches quickly. Keep in mind; you can only trim or remove branches when using a pole saw rather than cutting firewood.

After going through hours of research and testing, we have concluded the essential steps you need to follow to make your cutting experience convenient and worthy. Till now, you must come to know that how to use a pole saw.

Although you also have to follow some precautionary measures for using this saw efficiently and safely.  Anything that is used for the first time looks tricky, so you might find a pole saw a bit difficult to use in the beginning. 

If you want to find the right pole saw for your daily use, check out our best pole saw guide for getting an ideal one.

shares